• Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible.

• Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop.

• In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined.

• Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats.

• By administration of tremendous force by swaging machine, ferrule is tapered.

Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed –on metal ferrules are easier to work with.