| Motor |
| CROMPTON/ GEC/ KIRLOSKER" Make Slipring
Crane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr.
rated 40% ED as per IS: 325 having 'B' Class insulation. |
| |
| Drum |
| Made from Rolled steel as per IS:226 of adequate
thickness with side flange. Drum running on Bearing to
take adequate rope length. |
| Shaft |
| Forged from EN-8 steel machine fitted with Drum.
Chassis: Fabricated from joist of adequate size as per IS: 226 to
take all shocks. All the stands on the chassis are Boxed
type. |
| |
| Reduction |
1st Reduction: through Elecon/Radicon make worm
reduction Gear Box totally enclosed running on oil.
2nd Reduction: through open machine cut Gear from
carbon steel & pinion made of Alloy Steel duly heat
treated. |
| |
| Break |
- Electro Magnetic Hydraulic Thruster Brake of
reputed make.
- Mechanical Bend Brake with screw system with
Ferrodo Brake lineing.
- Extra safety Ratchet pawl arrangement on the side
of the drum for not moving the drum in opposite
direction for extra safety.
|
| |
| Coupling |
- We will provide flex. Brake Drum coupling on the
out put of motor & Input of Gear Box.
- Flex. coupling pin type on the output shaft of the
Gear Box & In put shaft of the pinion.
|
| |
| Controls |
- Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio.
- Control panel in sheet in sheet metal Box for dust,
heat & water resistance containing of :
- Isolator
- Overload Relay
- Contector
- Single phase preventor
- FuseHrc.
- Amp. Meter
- Voilt Meter (h) Neon Lamp Push Button for start & Stop Resistance Box 10 Minute rating.
|
| |
| Wiring & Pairrting |
| We will provide all wiring from weather proof
ar mured copper cable of adequate size & the Winch will
be painted by two coats of primer & Two coats of Grey
paint. |
| |
| Operator seat |
| We will provided operator seat by the side of controls. |
