F underside of runners
to top of hand chain
wheel, geared travel
only
mm
101
106
123
-
-
G beam flange to shaft end
mm
-
124
124
180
275
H overall width, push
travel
only
Range 1 mm
210
248
276
-
-
Range 2 mm
320
320
340
Range 3 mm
410
410
425
J Crossbolt to
track centreline
on ungeared
side
(geared trolleys
only)
Range 1
track
widths J mm
-
58-100
100-126
170
210
132
152
track
widths J mm
-
100-140
126-153
120
134
Range 2
track
widths J mm
-
140-156
153-192
200
225
164
184
track
widths J mm
-
166-210
192-216
152
166
Range 3
track
widths J mm
-
210-263
216-263
225
240
238
205
track
widths J mm
-
263-305
263-305
205
213
K depth of plateRange 1, 2 & 3 mm
21
21
34
-
-
L overall length
(Push) mm
160
200
275
-
-
(geared) mm
238
290
550
690
M underside of runner to flange (Push) mm
60
75
105
-
-
N underside of runner to gear tip (geared) mm
-
90
115
-
-
Minimum rados of track
curve mm
(Push)
1250
1500
1500
-
-
(geared)
-
1500
1500
2600
3200
Push travel weight in Kg.
Range 1
4.0
10.5
18.5
-
-
Range 2
4.5
11.0
20.0
Range 3
6.5
14.5
25.5
Geared travel weight in kg
Range 1
-
11.5
20.0
70
151
Range 2
-
12.5
21.5
72
153
Range 3
-
16.0
17.0
75
155
Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side)
Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel.
Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity.
Bottom of hand chain loop is 460 mm from ground level.
