SL-210
Screw pin chain shackles
Meets the requirements of Federal Specification
SL-2150
Bolt type anchor shackles. Thin hex head bolt-nut with cotter pin. Meets the requirements of Federal Specification
Working Load Limit* (Tones)
ISS Crosby
Body Dia (mm) d
C
Pin Dia (mm) D
B
Jaw Inside Width (mm) W
A
Inside Length (mm) S
G
Eye Outside Dia (mm) e
F
Average Weight with Nut Bolt Type Pin ( Kg)
0.5
6.4
7.9
11.9
22.4
15.5
0.1
0.75
7.9
9.7
13.5
33.0
19.1
0.1
1.0
9.7
11.2
16.8
31.8
23.1
0.1
1.5
11.2
12.7
19.1
36.6
26.9
0.2
2.0
12.7
16.0
20.6
41.4
30.2
0.3
3.25
16.0
19.1
26.9
51.0
38.1
0.6
4.75
19.1
22.4
31.8
60.5
46.0
1.0
6.5
22.4
25.4
36.6
71.5
53.0
1.4
8.5
25.4
28.7
42.9
81.0
60.5
2.2
9.5
28.7
31.8
46.0
91.0
68.5
3.1
12.0
31.8
35.1
51.5
100.0
76.0
4.1
13.5
35.1
38.1
57.0
111.0
84.0
5.3
17.0
38.1
44.5
60.5
122.0
92.0
7.2
25.0
44.5
51.0
73.0
146.0
106.0
12.1
35.0
51.0
57.0
82.5
171.0
122.0
19.2
55.0
66.5
70.0
105.0
203.0
145.0
32.6
Features
Working Load Limit permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy pins.
Capacities1 ton to 150 tons.
Shackles 55 tons and smaller can be can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Material Certification (Chemical) must be requested at the time of order.
Made from SAE 8620
Shackles symmetrically
loaded with two leg slings
having a maximum included
angle of 120 can be utilized
to full Working Load Limit.
Angle loads must be applied in the plane of the bow
Never exceed 120 included angle.
Use Bolt Type and Screw Pin Shackles Only
Side Loading reduction Chart
For Screw Pin & Bolt Type Shackles Only
Angle of Side load from
vertical in line of shackle
Adjusted WLL
0o In Line
100% of Rated WLL
45oFrom In Line
70% of Rated WLL
90oFrom In Line
50% of Rated WLL
Note
Maximum Proof Load is 2 times the Working Load Limit. Minimum Ultimate Load is 5 times the
Working Load Limit.
